Get Started

Obico is the Smart 3D Printing Platform for Klipper

Obico for Klipper is the best Klipper add-on to make your 3D Printer smart. Access Mainsail/Fluidd from anywhere in the wold. Monitor and control every aspect of your 3D printer and keep track of your prints with print history and statistics. AI failure detection gives you 3D printing peace of mind.

Learn about other ways to get started Get Started WIth Obico Cloud
Star us on GitHub 1,308

Get the Most Out of Klipper with Access Anywhere and Added Peace of Mind

  • Monitor & Control from Anywhere

    Check in on your prints, watch the livestream, and control every aspect of your 3D printer from anywhere using any device.

  • Catch Hazards Early

    Check in on your prints in real time to instantly know if your printer is acting up.

Use Obico’s App or open Mainsail/Fluidd’s full Interface from Anywhere

Print Status Notifications Where ever You Want However You want

Get unlimited free print status and update notifications pushed to your phone, sent via email, text, Telegram, pushover and many other platforms so you can do other tasks without worrying what’s going on with your printer.

Get Started With Obico Cloud

Obico Keeps an Eye on Your Prints So You Don’t Have To

  • Save Time & Money

    Obico watches your prints for you, uses AI to catch failures, and stops the print early. Do more 3D printing and less making spaghetti.

  • Prevent Equipment Damage

    Obico catches failing 3D prints early before they cause catastrophic equipment damage.

Learn more about AI failure detection

Easily Manage One or Many Printers Running Klipper

Get unlimited free print status and update notifications pushed to your phone, sent via email, text, Telegram, pushover and many other platforms so you can do other tasks without worrying what’s going on with your printer.

Get Started With Obico Cloud

Getting Started With Obico for Klipper

img

Setup Klipper

Setup Klipper on a Raspberry pi or other single board computer.

img

Setup Obico

Install Obico for Klipper.

img

Connect A Camera

Connect a camera to your raspberry pi with sufficient lighting.

img

Print With Peace of Mind

AI watches your prints, and alerts you if something looks fishy. You can now access your 3D printer from anywhere with ease on any device.

Get Started

Why Open-Source?

We believe the best solution is a transparent community-built smart 3D printing platform.

Like Klipper, Obico is open-source software registered under the AGPLV3 license. Open source means customizable and hackable. As makers, we love customization. We made Obico completely open-source so you can optimize it for your favorite 3D printer, or your fleet of multiple printers.

Since We’re Open-Source, You Can Choose How You Host Obico

Self-Host

  • Locally hosted on your own server
  • Some technical skills and additional hardware required
  • Fully customizable. Optimize your setup to your liking.
  • Associated costs depend on your server configuration

Obico Cloud

  • Managed and maintained by Obico
  • No technical skills or additional hardware required.
  • If you are running Klipper with Fluidd, or Mainsail, you can get started in less than five minutes.
  • Free plan for occasional printing. Pro plan for more frequent printing.
Learn More

Ready to Get Started?

Get started with Obico Cloud or learn more about self-hosting.

Get Started

FAQ's

Is Obico for Klipper free?
Obico’s free plan is 100% free. It gives you full remote access to your 3D printer from anywhere with the Obico mobile app or web app. The free plan is limited to one printer and some other features are limited. The Obico Pro Plan starts at less than the cost of one starbucks per month and gives you access to additional features like the ability to start prints and upload gcode remotely, premium 25fps webcam streaming, more failure detection hours and more. If you have the technical chops, you can also configure your own self-hosted Obico server using your own hardware. Check out the pricing page or compare self-hosting versus Obico Cloud.
Is Obico’s Klipper remote access secure?
Yes. The connection to your Klipper is protected by SSL-encryption, and it is authenticated with a login credential that is only associated with your account. Your account password is encrypted and stored in Obico’s database as a hash. This means even the Obico’s staff members won’t know your password. As long as you don’t share your password with anyone else, you will be the only one who can access your Klipper.
Can I use Obico without Klipper?
Yes. Obico also has a moonraker plugin so you can monitor and control your 3D printer running Klipper with Fluidd or Mainsail from anywhere.
Does Klipper need to be running on a Raspberry Pi?
Obico works fine if you aren’t running Klipper on a raspberry pi, but you will not be able to take advantage of the premium streaming if Klipper is not installed on a raspberry pi.
Still have questions?
Join the Obico Discord Server to get your questions answered from the Obico team andother community members.